FPV Drone CaddxFPV Gofilm 20
FPV Drone CaddxFPV Gofilm 20
Järeletulemise saadavust ei õnnestunud laadida
The CADDXFPV Gofilm 20 is a compact 2-inch cinewhoop designed for smooth indoor cruising, tight outdoor exploration, and cinematic 4K aerial filming. Weighing around 115g with a protective ducted frame and vibration-damping structure, it handles close-proximity flying safely and keeps footage steady, making it well suited for progressing beginners and experienced pilots alike. Powered by 1303 6000KV motors and three-blade propellers, it offers responsive, predictable control and roughly 5.5 minutes of flight time on a 4S 650mAh battery, while supporting 2S to 4S packs for flexible power options. An integrated 2.4GHz ExpressLRS receiver ensures a reliable control link, and the Avatar Moonlight kit delivers low-latency digital video alongside stabilized 4K recording that performs well even in low-light conditions.
Toote info
Model: Gofilm 20
FC: CADDXF4_AIO_ELRS
VTX: Moonlight Kit
Wheelbase: 94mm
Motor: 1303 6000KV
Propeller: HQprop T2×2×3
Weight: 115 ± 5g
Size: 133 × 123 × 39 mm
Flight time: 4S 650mAh, about 5.5 minutes
Receiver: ELRS 2.4G
Battery interface: XT30
MCU: STM32F405RGT6
Gyro and IMU: ICM42688
Barometer: BMP280
ExpressLRS receiver: ELRS V3.0 UART
ESC: 20A 4-IN-1
Blackbox: 8MB
Support Power: 2–4S LiPo/LiHV
Mounting hole distance: 25.5 × 25.5 mm
Firmware target: CADDXF4_AIO_ELRS
VTX Model: Moonlight Kit
VTX Firmware name: AvatarMoonlight_Sky_X.X.X
Communication Frequency: 5.725–5.850 GHz
Transmitter Power (EIRP): FCC: less than 30dBm; CE: less than 14dBm; SRRC: less than 20dBm; MIC: less than 25dBm
I/O Interface: JST1.04 (power cable), JST0.86 (USB), microSD Card Slot, IPEX-1
Sensor: Starlight sensor
FOV: Max 160°
Aperture: F2.1
Shutter: Rolling shutter
ISO: 100–25600
Recording resolution: 4K@30/60fps; 2.7K@30/60fps; 1080p@100/60fps; 720p@60fps
Max Mbps: 150Mbps
Video format: MP4 (H.264)
3D DNR: Support
Gyroflow: Support
Built-in EIS: Support
Wide Power Input: 7.4V–25.2V
Power consumption: 12V@1.4A, 8V@2.2A
Memory card type: U3 microSD, Max 256GB
Camera size: 19.6 × 19 × 24 mm
VTX size: 15.3 × 34.5 × 34.5 mm
VTX Installation hole: 20 × 20 mm / 25 × 25 mm (M2)
VTX Weight: 38.5g (Antenna not included)
OSD: Canvas mode
Latency: Average delay 22ms
Antenna: 2 (IPEX)
Komplektis
1x FPV Kit CADDXFPV Gofilm 20
Jaga
