Tattu TA1500 Smart Charger | 2-Channel | AC 1500W | 30A | 6S-14S
Tattu TA1500 Smart Charger | 2-Channel | AC 1500W | 30A | 6S-14S
Järeletulemise saadavust ei õnnestunud laadida
The Tattu TA1500 is an AC-powered dual-channel smart charger engineered for 6S to 14S LiPo, LiHV, and LiUHV drone and UAV batteries—supporting both Tattu Smart packs and standard soft-pack batteries—delivering up to 1500W of output power and up to 30A charging current per channel across a DC 20–65V output range. Operating on AC 100–240V (90–264V wide range, 50/60Hz; 10A max input) from standard wall outlets or field generators and weighing approximately 3.5 kg in a 276 x 166 x 119 mm housing, it comes equipped with AS150U output connectors alongside included AC input and USB cables.
Features
High-Power 1500W / 30A Dual-Channel Output: Delivers up to 1500W of total charging power and up to 30A per channel across a wide DC 20–65V output range for rapid turnaround on high-capacity 6S–14S UAV batteries
Flexible Queued & Parallel Channel Logic: Supports simultaneous dual-channel operation with selectable queued and parallel charging modes to optimize power allocation across multiple packs
Smart Matching & Plug-and-Charge Operation: Automatically identifies connected Tattu smart batteries, reads pack parameters, and initiates charging without manual setup, while offering straightforward manual current and mode selection for non-smart soft-pack batteries
Dedicated Charge & Storage Modes: Provides both standard Charge Mode and Storage/Maintenance Mode with automatic full-charge shutoff and rapid cell balancing to preserve battery health and extend cycle life
Split-Channel LCD Telemetry Display: Features a large split-channel LCD screen with push-button controls displaying real-time per-cell voltages with directional arrows highlighting the highest and lowest cells
Comprehensive Multi-Layer Safety Protection: Integrates real-time status monitoring with built-in safeguards against over-temperature, over-current, over-charge, and cable disconnection
Advanced Diagnostics & USB-C Firmware Updates: Supports USB-C firmware updates, equipment self-checks, channel calibration, switchable communication rates (1MHz or 500kHz), and customizable settings for language, volume, completion alerts, task scheduling, and capacity limits
Toote info
Model: TA1500 (Tattu TA1500 Dual-Channel Smart Charger)
Supported Battery Types: LiPo / LiHV / LiUHV (Tattu Smart Battery and Soft Pack)
Supported Cell Count: 6S–14S
Operating Modes: Charge Mode, Storage / Maintenance Mode
Input Voltage: AC 100–240V, 50/60Hz (Wide Range: AC 90–264V, Generator & AC Compatible)
Max Input Current: AC 10A
Output Voltage: DC 20–65V
Max Charging Power: 1500W
Max Charging Current: 30A x 2 (Up to 30A)
Standard Charging Mode Voltage: LiPo: 4.35V / LiHV: 4.45V
Maintenance / Storage Mode Voltage: LiUHV: 3.9V / 3.95V
Output Ports: AS150U
Firmware & Diagnostics Interface: USB-C (1MHz / 500kHz switchable communication rate)
Operating Temperature: 0°C to 45°C
Storage Temperature: -20°C to 60°C
Dimensions (L x W x H): 276 x 166 x 119 mm
Net Weight: Approx. 3.5 kg (3500g)
Included Accessories: AC Input Cable, USB Cable
Komplektis
1x Tattu TA1500 Smart Charger | 2-Channel | AC 1500W | 30A | 6S-14S
1x AC input cable
1x USB cable
Jaga
